Service
Electrical maintenance and safety checks
Electrical problems cost less to prevent than to repair. A check of your panel, connections, and devices finds loose, worn, and overloaded parts before they cause an outage.
- 5.0 on Google
- Licensed, Bonded & Insured
- WA Lic. WESTPEL745M7
A typical check covers
- Panel, breakers, and terminations
- GFCI and AFCI protection, tested
- Outlets, switches, and fixtures
- Grounding and bonding
- Exterior equipment and disconnects
When a check makes sense
- You just bought the property.
- The home is several decades old and the wiring hasn’t been looked at.
- You’re planning a remodel or adding large equipment.
- There’s been water damage, a rodent problem, or a nearby lightning strike.
- You manage a commercial property and want fewer surprise outages.
What we look for
Most electrical failures give a warning first. The signs are there well before anything stops working.
- Heat marks, corrosion, and loose terminations in the panel
- Breakers that are worn or the wrong size for the wire
- Protection devices that no longer trip when tested
- Worn, cracked, or loose outlets and switches
- Missing or damaged grounding and bonding
What you get afterward
A plain account of what we found, sorted by what needs attention now, what can wait, and what’s fine. No pressure to do all of it.
Before you buy, sell, or remodel
A home inspection covers the whole house in a few hours. When the report flags the panel, the wiring, or the outlets, an electrician’s look tells you what that means and what it would take to correct.
This is our assessment as an electrical contractor. It isn’t an official code inspection. Those are done by Washington L&I or the City of Vancouver on permitted work.
- Panels flagged in a home inspection report
- Older homes with two-prong outlets or cloth-covered wiring
- Aluminum branch wiring from the 1960s and 1970s
- Additions and owner-installed wiring of unknown quality
Maintenance for commercial properties
Commercial panels and equipment carry heavier, steadier loads, and connections loosen over years of heating and cooling. A scheduled check finds them before they take a tenant’s power down.
- Panels, disconnects, and terminations
- GFCI protection, tested
- Interior and exterior lighting that has failed
- A plain list of what needs attention, in order of importance
Does a check need a permit?
The check itself doesn’t. Repairs that come out of it may, depending on the work. Replacing a worn outlet like for like usually doesn’t. A new circuit or a panel replacement does. We tell you which applies before any repair starts.
Process
How a maintenance visit goes
Tell us about the property
Age, size, known problems, and anything that worries you.
On-site check
We open the panel, test protection devices, and look over the visible wiring and equipment.
Straight report
You hear what we found and what we’d do about it, in order of importance.
What affects the cost of a maintenance check
A check on a small house with one panel is a short visit. A commercial building with several panels is a longer one.
- The size of the property and the number of panels
- The age and condition of the wiring
- Access to the panel, the attic, and the crawl space
- Whether you want devices tested throughout, or a focused look at one concern
Do we cover your address?
Our service area page lists every community we work in.
From a customer
Ed is very responsive and thorough with his electrical work. He goes into the tough small spaces to fix our outlets and he also does a quick inspection to make sure our wiring is fine.
Questions
Things people ask us.
Does WestPeak Electric do electrical maintenance and safety checks?
Yes. WestPeak Electric is a licensed electrical contractor (Washington license WESTPEL745M7). We do electrical maintenance and safety checks throughout our service area. Call or text 360-521-6913, Monday to Friday, 7 AM to 5 PM.
How often should an electrical system be checked?
There’s no single rule for homes. A check makes sense when you buy a house, before a remodel, after water damage, or when a home is several decades old and the wiring hasn’t been looked at. Commercial properties usually set a regular schedule.
What are the warning signs between checks?
Breakers that trip repeatedly, lights that dim when appliances start, warm or discolored outlets, a buzzing panel, and any burning smell. Any of those is a reason to call.
Is this the same as a home inspection or a permit inspection?
No. A home inspector looks over the whole house and notes what is visible. A permit inspection is done by Washington L&I or the City of Vancouver on permitted work. A maintenance check is our assessment as a licensed electrical contractor of the condition of your electrical system and what, if anything, it needs.
My home inspection flagged the electrical panel. What now?
Have an electrician open it. A report usually flags a brand, the panel’s age, or something visible such as double-tapped breakers or scorching. We look at the actual condition and tell you whether it needs a repair, a replacement, or nothing.
Related
Related services
Request an estimate
Have an electrical project coming up?
Tell us what’s going on. We’ll ask the right questions, look at the job if it needs it, and give you a clear scope and price.
- 5.0 on Google
- Licensed, Bonded & Insured
- WA Lic. WESTPEL745M7